Skip to content

Gasket Set for Lava V100, V200 and V300 Premium

Set of gaskets for the Lava V100, V200 and V300 Premium. Restores full vacuum when the original gaskets are worn.

343,-

Gives 34 bonus points to members upon purchase
In stock
Placeholder for rich text
Placeholder for rich text
Få beskjed når varen er på lager
Item No.: 657
Sikker betaling
1-5 dagers levering
Angrerett / Garanti
Hvorfor logge inn?
🎁 10% rabatt på dette kjøpet
💰 Bonuspoeng på alt du handler
🚚 Gratis frakt over 1000kr (inntil 15kg)

This product is temporarily out of stock. If you would like to receive an email when it’s back, enter your email address in the form below.

Information

Gasket Set for Lava V100, V200 and V300 Premium: Full Vacuum Again in Minutes

Is the machine taking longer than before, or no longer pulling a full vacuum? Then it is usually not the machine that is at fault, but the gaskets. Gaskets are wear parts that are compressed with every single vacuum cycle, and after heavy use they lose the springiness that keeps the chamber tight. This set contains gaskets for the Lava V100, V200 and V300 Premium, and gives the machine its suction back without a workshop visit.

Restores full vacuum
Fits V100, V200 and V300 Premium
Changed without tools
Extends the machine's life

A gasket change is the cheapest service you can give your vacuum sealer. Instead of living with mediocre packing, or considering a new machine, you change the gaskets and are back at full strength. If you pack a lot in season, it is smart to keep a set on hand, so butchering day never stops because a gasket gave out.

Pro tip for your vacuum sealer!
Wipe the gaskets with a damp cloth after every packing session. Fat and meat juices on the gasket are the most common reason a machine loses suction long before the gasket is actually worn out.

Features

  • Full suction back: New gaskets make the chamber tight again, so the machine vacuums like it did when new.
  • Easy change: The gaskets are removed and fitted by hand, without tools or a workshop.
  • Smart spare part: With a set in the drawer, packing never stops mid-season.

How to use

  1. Unplug the machine and open the lid.
  2. Carefully remove the old gaskets by hand.
  3. Clean the groove and press the new gaskets evenly into place.
  4. Run a test vacuum on an empty bag to check that the chamber is tight.

Specifications

Product Gasket set for vacuum sealer
Brand Lava
Fits Lava V100 Premium, V200 Premium and V300 Premium
Type Wear part/spare part

FAQ Frequently asked questions

How do I know the gaskets need changing?

The most common signs are the machine taking longer, failing to pull full vacuum, or the bag losing vacuum after a short time even though the seal looks fine. Check first that the gaskets are clean, and if that does not help, it is time to change them.

Does the set fit my Lava machine?

The set is made for the Lava V100 Premium, V200 Premium and V300 Premium. If you have another Lava model, contact us before ordering and we will find the right spare part.

Is the change difficult?

No, the gaskets are changed by hand in a few minutes, without tools. Just remember to clean the groove before fitting the new ones, and test with an empty bag afterwards.

Manufacturer

Landig

Reviews

Relaterte produkter

Alternative produkter

  • visa.png
  • mastercard-full.png
  • vipps-orange.png
  • bring.png
  • klarna-dark.png
  • postnord.png
  • posten.png