Information
Borniak Cold Smoke Adapter ZW-01
The Borniak cold smoke adapter ZW-01 helps you achieve more stable conditions for cold smoking. It is installed between the smoke generator and the smoking cabinet so the smoke cools down before entering the chamber. This improves control when you want smoke flavour with minimal heat. The manufacturer describes that the chamber temperature can be kept close to ambient, typically only 1 to 2 degrees above outside temperature, depending on setup and environment.
|
✔ Installed between smoke generator and cabinet for cold smoking
|
✔ Smoke cools down before it enters the chamber
|
|
✔ DN 100 mm connection, also suitable for DIY smoke chambers
|
✔ Flex hose, clamps and cabinet connector pipe included
|
Key features
- ✔ Improves control in cold smoking by cooling smoke before the chamber
- ✔ Installs between the existing smoke generator and the smoker cabinet
- ✔ Manufacturer notes chamber temperature close to ambient, typically 1 to 2 degrees above
- ✔ DN 100 mm makes it practical for DIY smoke chambers with a 100 mm pass through
Specifications
| Product | Cold smoke adapter |
| Model | ZW-01 |
| Connection | DN 100 mm |
| Dimensions | Approx. 240 x 250 x 288 mm |
| Listed weight | Approx. 1 kg |
| Compatibility | Listed for Borniak smoker cabinets in the 70 and 150 series |
| In the box | Flex hose, clamps and an extra cabinet connector pipe |
How to use
- Remove the smoke generator from the cabinet.
- Mount the smoke generator onto the cold smoke adapter.
- Connect the adapter to the cabinet using the flex hose and tighten with clamps.
- Place the adapter on a stable surface and ensure clear airflow around the hose.
- Start the smoke generator and cold smoke for your chosen time and raw material.
FAQ
What does the cold smoke adapter do?
It increases the distance between the smoke generator and the chamber so heat can dissipate and the smoke cools down before entering the cabinet.
Is everything included?
The set is typically supplied with a flex hose, clamps and a cabinet connector pipe. The manufacturer notes that a separate connector between the adapter and generator may be required for some setups.
Can it be used with a DIY smoke chamber?
Yes. Several retailers describe use on DIY builds, typically requiring a 100 mm pass through for the hose.
